All IMT courses numbered 100 and above may be applied to the major field and elective requirement for the Associate in Arts and Associate in Science degrees.

IMT 103 Industrial Manufacturing Tech I (3)(1,4)

This course provides classroom and laboratory learning experiences related to fundamental machine tool technology by focusing on power saws, drill presses, basic lathes and related tooling. Course includes speed and feed calculation, part layout, basic measuring tools and related manufacturing theory. Safe work practices are strongly stressed. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Available.

In-District Tuition/Fees: $446 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Fall and Spring

IMT 104 Industrial Manufacturing Tech II (3)(1,4)

This course is a continuation of IMT 103 beginning with engine lathes and introducing horizontal mills, vertical mills, and CNC basics. Course includes related information on tooling, speeds and feeds, measuring instruments and manufacturing theory. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $446 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 103 or consent of instructor

Semester(s) Offered: Fall and Spring

IMT 106 Mathematics for Machinists (5)(5,0)

Study of all mathematics used in the machine shop. Includes addition, subtraction, multiplication, division, fractions, decimals, percentage, area and volume, algebra, geometry, and right angle trigonometry. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $660 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Varies

IMT 107 Technical Math I (4)(4,0)

Intended for students in technical programs or pre-engineering technology programs where a coverage of basic mathematics is required. An integrated approach in algebra, plane geometry, and trigonometry. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $528 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: MTH 090, consent of instructor, or appropriate score on placement test

Semester(s) Offered: Fall and Spring

IMT 108 Industrial Manufacturing Tech III (3)(1,4)

A continuation of IMT 104, with emphasis on a greater degree of precision in completing a comprehensive project. Grinding operations, form grinding, O.D. and I.D. grinding are introduced, including grinding wheel specifications, technique and related manufacturing theory. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $446 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 107 or MTH 107 and IMT 104 and CAD 101 or consent of instructor

Semester(s) Offered: Fall and Spring

IMT 109 Industrial Manufacturing Tech IV (3)(1,4)

A continuation of IMT 108 with emphasis on a greater degree of precision in completing a comprehensive project. The dividing head rotary table and EDM will be introduced, including electrode specifications, technique and related manufacturing theory. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $446 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 108

Semester(s) Offered: Fall and Spring

IMT 110 Intro to Computer Integrated Mfg (2)(1,2)

A survey of the tools and theory regarding computer integrated manufacturing (CIM). CIM is the union of hardware and software, database management, and communications to automate and control production activities from planning and design to manufacturing and distribution. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $314 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: CAD 101 and IMT 107 or MTH 107 or consent of instructor

Semester(s) Offered: Fall and Spring

IMT 111 Technical Mathematics II (4)(4,0)

Continuation of IMT 107, Technical Mathematics I, and an introduction to further methods used in mathematics problem-solving needed for technology. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $528 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: Grade of C or better in IMT 107 or MTH 107 or consent of instructor

Semester(s) Offered: Varies

IMT 112 Metrology-The Study of Measurement (3)(1,3)

A study and use of the various measuring tools used in the establishment of quality control for the manufacturing of parts and assemblies including basic SPC techniques. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Available.

In-District Tuition/Fees: $396 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Fall and Spring

IMT 119 Fabrication of Machine Parts (3)(0,6)

The student will apply theory learned in lecture/discussion including selection of material and proper machine procedure to complete the project with the necessary tolerances and finishes. Improvements in areas of individual machining weakness will be stressed. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $446 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 109 or consent of instructor

Semester(s) Offered: Varies

IMT 203 Manufacturing Process & Design Tech (3)(3,0)

A survey of manufacturing methods and materials employed in a variety of industrial processes. The student will understand the various methods of product fabrication and the manufacturing processes for sustainable, sound economic decision making in manufacturing and product design. Other topics include the interrelationship among materials, their selection for use in product design and processes, and conversion of these materials into finished components. (1.2) Proficiency Credit Available (3 LETSIRC) Pass/No Credit Not Available.

In-District Tuition/Fees: $396 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 107 or MTH 107

Semester(s) Offered: Varies

IMT 204 Industrial Manufacturing Tech V (5)(0,10)

The laboratory portion of IMT 203. The student will select a project from a group of assembled projects (6 parts or more) to be completed. (1.2) Proficiency Credit Not Available Pass/No Credit Not Available.

In-District Tuition/Fees: $715 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 203 or concurrent enrollment in IMT 203 or consent of instructor

Semester(s) Offered: Varies

IMT 208 Basic Die Theory (4)(2,4)

The study of the design and fabrication of stamping and forming dies used in the metal stamping industry. Included in the course will be the knowledge of metals used for specific stamping operations. The student will be required to design several progressive stamping dies throughout the course. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $583 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 108 or consent of instructor

Semester(s) Offered: Varies

IMT 209 Basic Mold Theory (4)(2,4)

The study of design and fabrication of plastic, die cast, and rubber molds for production of finished products. Included are units of instruction in the flow characteristics of thermoset thermoplastics and die cast materials and their properties. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $583 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 108

Semester(s) Offered: Varies

IMT 212 Metallurgy-The Study of Steel (2)(2,0)

Basic introduction to ferrous and nonferrous materials and alloys and their molecular activity during processing from raw material to finished product. The composition and changes of the metal are analyzed under laboratory testing to heat treatment, destructive and nondestructive testing, and various fabrication processes. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $274 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Fall and Spring

IMT 214 Jig & Fixture Theory (2)(2,0)

The course will cover parameters involved in controlling the design of either a jig or fixture for a specific piece part and the type of construction dictated by the number and design of that piece part. Included in the course will be the relationship of jigs and fixtures to stampings, castings, and machine parts. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $264 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 104

Semester(s) Offered: Varies

IMT 215 Special Projects in Indust Manuf (1-4)(0,2)

(0, 2-8) This course allows an advanced student to study or complete, in depth, a related subject or project in conjunction with machine tool processing. Course is repeatable to four credits. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $528 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: Consent of instructor

Semester(s) Offered: Varies

IMT 220 Introduction to CNC Programming (4)(2,4)

This course is an introduction to CNC programming. The use of M & G code programming to produce CNC programs for machined parts will be taught. Specific areas of programming including linear and circular interpolation, canned cycles, drilling, reaming, tapping, boring, face milling, end milling and the use of sub programs will be covered. Machine operation of CNC Bridgeports with Boss 9 and Discovery 308 controls will be covered and used to proof run programs. A microcomputer lab for program composition DNC transfer and computer simulation of Fanuc and a variety of controls will be used. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $583 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 110 or concurrent enrollment in IMT 110 or consent of instructor

Semester(s) Offered: Fall and Spring

IMT 221 Introduction to CNC Toolpathing (4)(2,4)

The student will bring together his/her knowledge of geometry generation using CAD and conventional CNC program generation to learn computer generated toolpathing. The student will generate geometry, initiate computer toolpaths and output executable CNC programs using CAD/MasterCam toolpathing software on personal computers. Additionally post processor generation will be discussed. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $583 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 110 and IMT 220 or concurrent enrollment in IMT 220 or consent of instructor

Semester(s) Offered: Fall and Spring

IMT 222 Advanced CNC Programming (4)(2,4)

This course is a continuation of IMT 220 with great depth and scope. The complexity of machining center programming increases with the introduction of MACRO programming and advanced part geometry. Emphasis is placed on cycle time efficiency and the incorporation of flexible manufacturing concepts. Programs are composed utilizing CAD, CAM software on personal computers and proven Bridgeport Boss 9 and Discovery 308 Machine Centers Probing functions are introduced. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $583 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 221

Semester(s) Offered: Varies

IMT 223 Special Problems in CNC Programming (2)(1,2)

Exploration of advanced topics in Computer Aided Manufacturing. DNC links, CIM Environments and extended capabilities of CAD/CAM not realized by each system individually are illustrated and discussed. Projects in CNC problem solving and trouble shooting are accomplished utilizing the CNC machine lab and microcomputer labs using CAD, CAM software on personal computers. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $304 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 221 and IMT 222 or concurrent enrollment in IMT 222

Semester(s) Offered: Varies

IMT 233 Injection Molding Dies (2)(2,0)

The student will acquire a full understanding of the design of molds, including care of molds, setting basic types and applications, features and components and production of molds. (1.2) Proficiency Credit Available (3 LETSIR) Pass/No Credit Not Available.

In-District Tuition/Fees: $264 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: IMT 133 and IMT 231

Semester(s) Offered: Varies

IMT 234 Special Topics in Industrial Manuf. (1)(.5,1)

Designed to satisfy specific needs or interests of students and the community. The following guidelines are to be used in selecting topics: 1 ) adequate and available material on specific topics; 2) comprehensive outlines for each topic; and, 3) course should be designed to increase skill and knowledge in field of industrial manufacturing. Course is repeatable to four credits. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $132 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Varies

IMT 235 Special Topics in Industrial Manuf. (2)(1,2)

Designed to satisfy specific needs or interests of students and the community. The following guidelines are to be used in selecting topics: 1) adequate and available material on specific topics; 2) comprehensive outlines for each topic; and, 3) course should be designed to increase skill and knowledge in field of industrial manufacturing. Course is repeatable to eight credits. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $264 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Varies

IMT 236 Special Topics in Industrial Manuf. (3)(2,2)

Designed to satisfy specific needs or interests of students and the community. The following guidelines are to be used in selecting topics: 1) adequate and available material on specific topics; 2) comprehensive outlines for each topic; and, 3) course should be designed to increase skill and knowledge in field of industrial manufacturing. Course is repeatable to 12 credits. (1.2) Proficiency Credit Available Pass/No Credit Not Available.

In-District Tuition/Fees: $396 (effective 2019/20 academic year)

In-district tuition is subject to change based on Board approval (https://elgin.edu/pay-for-college/tuition-fees/).

Prerequisite: None

Semester(s) Offered: Varies